Due to the acquisition of new patio furniture; we needed to move the ground mounted light spike. Cue 3D printing a pair of holders to enable the light to be wall mounted.
The design was influenced by the focus-column holder for the laser cutter. You can play with the 3D model below.
Experiment Time:
This model will fail; but how long will it last?
These parts are printed in PLA and will face a range of different weather conditions; from wind and rain to direct sunshine.
The following data will be measured over time:
| Date | Does it still work? Y/N | Comments |
|---|---|---|
| 08/07/2023 | Y | Installed at 8pm |
| … | … | … |
| … | … | … |
| … | … | … |